{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Extension for drive spindles SPVH13 length 500 mm 6 S8 Max.RPM25,000 incl. 6 mm collet
Article no.: 4007220730478
Article code:
Please note the delivery time and limited advice:
We order this item for you directly from the manufacturer, as it is not part of our main range and is therefore not in stock with us.
InfoProduct details
Identification numbers & Classifications
| Article number | 4007220730478 | |
| EAN / GTIN | 4007220730478 | |
| Manufacturer number | 87101280 | |
| L-Number | L51050 1982 |
Description
Description:
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand. With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand. Extension for drive spindles for manual application with a diameter of 13 mm, a length of 500 mm, a tool mounting of 6 mm and a shank holder of 8 mm. 2 keys DM SW 6/7 mm and 1 collet 3 mm.
Feature:
- RPM, max.: 25000 RPM
- Collet group: 10
- Incl. dia collet [mm]: 6
- Net weight: 0.502 kg
- Dia. shank holder [mm]: 8
- Dia. spindle, max.: 13 mm
- Dia. tool mounting: 6 mm
- Length, mounting pin: 28 mm
- Length, total: 606 mm
Advantage:
- Cost-effective alternative to customized burrs and mounted points with long shanks.
Supplied with:
- Special lengths are available on request.
Note:
- The maximum permitted rotational speed is 25,000 RPM.
- Caution! When using spindle extensions, please observe the valid safety regulations and accident prevention regulations. Please do not clamp tools which are too large on the extension since they are driven by a core. The extension and machine must be guided in a line. Levering and tilting result in damage to the extension.
- When working with long shank lengths, it is essential that the tool is inserted into the workpiece (e.g. bores, pipes, ducts or keyways) before the drive system is switched on. The extension is only intended for manual use in connection with suitable air grinders, electric grinders or flexible shaft handpieces for tools with standard shanks. The extension and a tool permitted for use at the appropriate rotational speed are clamped into an impact-free collet on the device. Do not clamp on the transition radius. Clamping of a second extension or of tools with excessively long shanks is not permitted.